Fire-fighting equipment foam generators, dispensers, etc.

Dosing tanks
The fire dispenser tank is designed for use in automatic fire extinguishing systems:
— in technological premises where the formation of steam and gas-air mixtures of categories IIA, II B groups T1, T2, T3 is possible;
— in vertical steel tanks, vertical steel tanks with floating roof and pontoon, reinforced concrete tanks with flammable liquids;
— for long-term storage and automatic mixing of the foaming agent with water and the supply of the foaming agent in a given proportion (3%, 6%).

High-pressure HSV foam generators
The high-pressure HSV foam generator is designed to produce low- and medium-multiplicity air-mechanical foam used in fire extinguishing systems of tanks and oil storage tanks by a sublayer method.

GPS Foam Generators
The GPS 200, GPS 600, GPS 2000 foam generator (GPS foam generator) is designed to produce an air-mechanical foam of medium multiplicity from an aqueous solution of a foaming agent.

GPSS Foam Generators
The GPSS 2000, 600 foam generator is used in stationary fire extinguishing installations of steel vertical oil tanks with a volume of 5000 m3 and above.

Spark extinguishers ISG, IGS
The ISG, IGS automotive spark extinguisher is designed to be installed on the exhaust pipes of vehicles entering the territory of a high fire hazard area — oil refineries, oil storage facilities and tank farms, gas stations — and is used to catch sparks in combustion products of internal combustion engines.Gorenje

Chambers of low-fold foam KNP
Afros low-fold foam chambers KNP-5 and KNP-10 are designed to produce low-fold foam and are used in combined automatic fire extinguishing systems of tanks with flammable liquids.

The cassette of the fire barrier CO
The KO cassette is a flame-extinguishing replaceable element of the fire barrier. The cassette of the KO firebreaker is designed for completing OP-AAN firebreakers, breathing CDR valves, safety hydraulic CNG valves, non-freezing breathing membrane NDCM valves.

Fire barriers OP
OP fire barriers are designed to temporarily prevent the penetration of flame into the tank with oil and petroleum products when igniting explosive mixtures of gases and vapors with air coming out of it.

Flame arresters PP
The flame barrier PP is used to temporarily prevent the penetration of flame into tanks with oil and petroleum products when igniting explosive mixtures of gases and vapors with air coming out of it. The flame barrier is installed between the tank and the breathing valve.

Fire fuses POK
Fire communication fuse (fire barrier) The POK is designed for installation on gas and oil pipelines operating at a pressure of up to 1.6 MPa (16 kgf / cm2) in order to prevent the spread of flame through the pipeline in case of its occurrence.

Gorgon Bursting membranes
Gorgon bursting safety membranes are designed for use in sublayer fire extinguishing systems to seal the pipeline section connecting the tank to a high-pressure foam generator.

Catalog